Welcome to Orlando Outfitters!

2814 Corrine Drive
Orlando, FL 32803
407-896-8220

Epoxy, Glues, Cements, & Waxes

10 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Dubbing Wax, Small Tube

    Dubbing Wax - Small Tube

    Starting at: $2.49

    Odorless, colorless, non-drying dubbing wax in a no- mess tube. Learn More
  2. Loon Fly Tying Powder - Phosphorescent

    Loon Fly Tying Powder - Phosphorescent

    $14.95

    Loon Phosphorescent Fly Tying Powder gives tyers the ability to add glow-in-the-dark properties to their tying cements. It is compatible with traditional cements as well as UV cured resins. Features:
    • Adds phosphorescence
    • Non-toxic
    • Does not compromise cure time or strength
    • Compatible with all Loon cements and UV Products
    • Compatible with other brands of tying cements
    Learn More
  3. Loon Fly Tying Powders - Primary Kit

    Loon Fly Tying Powder Kits

    Starting at: $14.95

    Loon’s fly tying powders are the best way to add pigment or sparkle to your cements or UV curing resins. Features:
    • Customizes tying cements or UV resins
    • Non-toxic
    • Does not compromise cure time or strength
    • Compatible with all Loon cements
    • Compatible with all Loon UV resins
    Learn More
  4. Loon Hard Head

    Loon Hard Head

    Starting at: $7.50

    Never mix epoxy again! Hard Head is an odorless, non-toxic, thick head cement perfect for building glossy heads and bodies. Dries hard and glossy. Use the supplied applicator brush to apply Hard Head to flies. Replace cap to prevent Hard Head from drying.
    • Thick head cement
    • Dries hard and with a high gloss
    • Odor free
    • Water based
    • Comes with applicator brush
    • Excellent for building up heads and bodies
    • Perfect for painting poppers
    Learn More
  5. Loon Mixing Cup

    Loon Mixing Cup

    $7.50

    The Mixing Cup is the perfect vessel for modifying head cements and UV Clear Fly Finish, and all but eliminates clean-up. Because cements will not bond to the Mixing Cup, once cured they will pop out. Features:
    • Unbreakable
    • Suctions to smooth surfaces
    • Will not bond to cements or epoxies
    • Eliminates clean up
    Learn More
  6. Loon UV Clear Fly Finish - Flow

    Loon UV Clear Fly Finish - Flow

    $16.95

    The thinnest UV resin available from Loon, Flow is thin enough to work as a head cement replacement, but strong enough to coat heads, bodies and midges. Cures within seconds when exposed to Loon’s UV Mega Light or UV Power Light. Features:
    • Ultra-thin UV-curing resin
    • Allows infinite work time
    • Cures instantly when exposed to UV light
    • Cures hard and clear
    • Can be used as head cement replacement
    • Includes brush applicator
    Learn More
  7. Loon UV Clear Fly Finish Thick

    Loon UV Clear Fly Finish Thick

    Starting at: $16.95

    UV Clear Fly Finish is for those who believe “five minutes to cure is five minutes too long.” No mixing or waiting is required, and it remains workable until exposed to direct sunlight or Loon’s UV Power Light or UV Mega Light, at which point it will cure in a matter of seconds. The possibilities are endless! Apply Fly Finish to the fly while indoors or shaded from the sun. Use the applicator and/or rotating vise to form into the ideal shape. Expose to sun light or use Loon’s UV Mini Lamp or UV Power Light to cure. In direct sun or when using Loon’s UV Mega Light or UV Power Light, hardening should take approximately 15 seconds.
    • UV Blocking application needles
    • Taper-Tip needle prevents clogs
    • Build fly heads and bodies
    • Instantly cures with sunlight or UV light
    • Brush Applicator included
    • Needle tip included for precision tying
    Learn More
  8. Loon UV Clear Fly Finish Thin

    Loon UV Clear Fly Finish Thin

    Starting at: $16.95

    Loon UV Clear Fly Finish Thin is perfect for delicate applications, going on thin without sacrificing curing speed and strength. It can be used to make smaller heads, bodies or wing cases, or to coat a small thread head… the possibilities are endless. Apply Fly Finish to the fly while indoors or shaded from the sun. Use the applicator and/or rotating vise to form into the ideal shape. Expose to sun light or use Loon’s UV Mini Lamp or UV Power Light to cure. In direct sun or when using Loon’s UV Mega Light or UV Power Light, hardening should take approximately 15 seconds.
    • UV Blocking application needles
    • Taper-Tip needle prevents clogs
    • Build fly heads and bodies
    • Instantly cures with sunlight or UV light
    • Brush Applicator included
    • Needle tip included for precision tying
    Learn More
  9. Loon UV Mega Light

    Loon UV Mega Light

    $64.95

    Out of stock

    The Mega Light is the best way to achieve a solid cure with all Loon’s UV curing resins. Features:
    • Maximum intensity light for tying and bench applications
    • 3.8 Watt output
    • Up to 220 lumens
    • Uses 2 AA batteries (included)
    Learn More
  10. Loon UV Power Light

    Loon UV Power Light

    $39.95

    Out of stock

    This powerful UV light is perfect for curing Loon’s UV products either individually or at a volume rate. A push button on/off and a powerful beam makes curing UV products simpler than ever. One AA battery included. While indoors or shaded from the sun apply Loon UV product and form into desired shape. To cure, shine UV Power Light on UV product. UV product should be fully cured and hardened in 15 seconds.
    • UV light for curing Loon's UV products
    • High intensity light for tying and bench applications
    • Uses 1 AA battery (included)
    Learn More

10 Item(s)

per page

Grid  List 

Set Descending Direction